Garmin GTX 328, Mode-S Transponder, as new, with fresh Form1

As-New-Condition:

Comes with Form-1 Certificate from June 20th, 2017 (plus Green Tag from Altenrhein Aviation).

S/N 13K011617

The Garmin GTX 328 transponder provides the European market with a lower cost solution to fulfil the upcoming VFR Mode S mandate. This full-featured, ETSO certified transponder brings a unique level of functionality and utility to an airplane. The solid state transmitter provides 250 watts nominal power output and eliminates the need for a cavity tube which, sooner or later, will fail and require expensive replacement.

And since the transponder's design is 100 percent solid state, there's no warm up time, lower power consumption and much lower heat emission. All of which translates to a longer service life.

Some of the GTX 328's biggest features are the easiest to see. Among them, the easy-reading DSTN Liquid Crystal Display which reverses the numbers out of black for optimal viewing. An innovative keypad makes entering a squawk code or Flight ID a snap. And a dedicated VFR button allows for quick and easy 7000/VFR squawking.

The GTX 328 also offers several timing and display functions: flight time, count-up timer, count-down timer or current pressure altitude. It is designed to meet the European VFR Mode-S transponder mandate.

• The GTX 328 is intended to serve VFR/Class 2 aircraft where there is adequate size and power consumption support for a GTX 328 unit.
• The GTX 328 is designed to be a straightforward retrofit.
• The GTX 328 retains many of the GTX 330 features such as displaying outside air temperature, altitude monitoring, count up and count down timers (using a built-in digitized voice annunciator to alert the pilot when preset altitude limits have been exceeded or timer expiration), density altitude functions, and front-panel input for flight ID.
• The GTX 328 has a solid-state design that uses less power, reduces heat emissions and eliminates warm-up time.
• The new GTX 328 will not offer TIS, EHS or ADS-B functionality.
• Garmin GTX 328 Specifications:
  • ETSO compliance: 2C112b, ED 73B.
  • Temperature range: -20°C to +55°C.
  • Weight: 4.2 lbs. (1.9 kg) installed with racks an connectors.
  • Power Requirements: 11.0 to 33.0 VDC (typical power input 27 watts).
  • Altitude: 15,000 ft.
  • Transmitter Frequency: 1090 MHz.
  • Transmitter Power: 250 watts nominal at unit.
  • Receiver Frequency: 1,030 MHz.
  • Receiver Sensitivity: -74dBm nominal for 90% replies.
  • External Suppression input: input - Low < 0.5V, High > 8V.
  • Dimensions: Bezel Width 6.25' (159 mm), Bezel Height 1.65' (42 mm), Depth = 11.25' (286 mm) behind panel with connectors.
  • Display: DSTN LCD Display.
  • The GTX 328 will be certified to European ETSO.

The Garmin GTX 328 will be deliverd including:

• Installations-Rack
• Backplate
• Connector Kit